costs

Costs

The Brexit has made parts more expensive at the company I order my parts from. Also due to the shortage of raw materials, the prices of parts have become more expensive unfortunately.

For a complete service (overhaul) I work by the job and not by the hour. This applies to modifications. So the prices are fixed regardless of the time it takes. Of course, this varies per device. An overhaul without additional surprises of e.g. a Dynacord S75 & S76 takes easily 7 to 8 hours.

Before I proceed to repair a defect(s) I first do an analysis. The costs are 20E

If the unit is fully functional there are no costs for just an overhaul. If you want to overhaul a defective device the analysis costs will be calculated.

Repair costs:
If a device is defective I use an hourly rate. It is often the case that with an overhaul the defect (s) is also remedied. This saves again in costs. The hourly rate is 50E.

Overhaul costs :

Dynacord echocord mini – 230E

Dynacord echocord 100 – 275E

Watkins Copicat solid state models - 250E

Lem EC20 – 275E

Vorg Pearl EO-301 & Roland Space Echo RE-150 – 250E

Dynacord super 75 & 76/Echolette echo 400 – 350E

Roland Space Echo RE-201/RE-301 and 501/Evans E810 - 350E

Korg Stage Echo 300 en Stage Echo 500 - 350E

these are the most common brands, if you have another brand, we can discuss the price.

An overhaul does not include the motor ! These almost never break down but it can happen, they are not made anymore so rare. If I have them in house then a motor for a mini,400,504 and 100 (1 speed) will cost 75E and for a S75/S76 (2 speed) 100E.

Should a motor be defective from a Roland space echo or not running stably it can be rebuilt – 100E

Should the spring reverb be missing for a S75/S76 or defective it will cost 75E. these are also not made anymore and rare. I don't always have these in the house.
For a Roland and Korg tape echo, among others, a replacement spring reverb is 75E.

When repairing, the rubber and plastic rollers are charged separately, however not when overhauling :

Dynacord rubber pinch roller – 30E

Dynacord plastic drive roller – 10E

Dynacord 3D printed and metallic sprayed slider – 20E

Dynacord 3D printed and black sprayed inside knob – 15E

Should there be other defects such as: rubber feet that are missing (7,50E) Dynacord top or bottom plate missing (20E) Dynacord VU meter (40E) this will be charged separately and is not included in an overhaul. These parts are still very difficult to obtain and are no longer made new. I may not have them in stock (except the rubber feet of course)

Roland Space Echo VU meter bulb - 5E

Service : 60E

Polishing heads (not flat polishing) : 20E 

Flat polishing heads : 20E per head

You get 3 months warranty but the shipping costs are for your own account.

Prices are EXCLUDING 21% Dutch VAT !