Korg SE-300 Tape Echo COMPLETELY OVERHAULED !
All electrolytic capacitors have been replaced for quality Panasonic 105 degrees ones. Also the power supply ofcourse.
All the potentiometers have been washed clean en air dried with an air compressor and are scratch free.
All the female jack inputs have been cleaned with Krackle killers and that is a great product from Austalia.
The heads have been polished and shines like new. Cleaned afterwards with isopropanol and demagnetised.
The heads are also been set (azimuth) for the best high frequency response.
The velts have been replaced for new ones and the tapeloop is running tight around the heads for the best echo signal.
Rubber pinchroller that runs smoothly after lubricated with special oil and the rubber has been cleaned with rubber cleaner.
Sounds fantastic and A Korg tape echo has a very stable feedback that can go on forever without going into self oscilation. If you want this, ofcourse he can !
The echo is in the reverb and that gives it (also with a Dynacord S75/S76) a very spacy sound !
New tapeloop on the unit and 3 extra tapeloops are included . New RTM tape (made them myself)
VU meter and light is working.
This is the 230Vac version so for USA users I will enclose a 110Vac to 220Vac converter !
3 months warranty on the delivered work but shipping costs excluded.
Including a new footswitch !
See the test video !
Thank you for watching and if you have questions, please let me know !
Features :
1-Input Level Meter
VU input level meter reads between -5dB and 0 dB
2-Peak Level Indicator
Led indicates saturation
3-Input Volume
Use these knobs to adjust input level (CH A and CH B)
4-Input Jacks
TS type input jacks for instruments or mic (CH A and CH B)
5-Head Selectors
Press the cancel button to cancel all the heads when you don´t want any echo effect.
Press button 1 for a conventional echo effect
Press 2 when you want a bit longer echo
Press 3 for the longes echo effect having a maximum delay time of 1.2s
Press two or more buttons at once to get more complex echo effects and "swell" effects
6-Feedback Control
7-Speed Control
Adjust time delay between echos
8-Reverb Input Balance Control
9-Effect Switch
10-Footswitch jack
